Brokerage Tug Commercial Vessels for sale in the US
1952 45′ x 13′ Roamer Subchapter M Compliant Model Bow Tug
Price: $225,000 USD
Meet the new workhorse for your fleet! She’s ready to get to work and she’ll get the job done!!
Draft: 5′
Ex USN Portsmouth Lady Submarine Tender
Fresh USCG Subchapter M COI with Great Lakes Route
Powered by 6-71 Detroit, cleanest Detroit around!
Gear is Twin Disc 4.5:1
Topside painted in 2022
Bottom painted in 2021
4 new batteries in 2023
New winches
Safety: all safety gear for USCG new in 2022, fixed fire CO2 system, heat detection and high water alarms
Located in Thousa... read more
| Year: | 2028 |
| Length: | 45' |
| Location: | New York USA |
| Price: | $225,000 |
View Details | |
70' Ex US Army ST Harbor Tug $675,000
1954/2010 70' x 19.5' x 9' Ex US Army ST Class Harbor Tug
Overall length: 70'11"
Gross tonnage: 72 tons
Net tonnage: 57
Last survey: October 2010
Shell plate thickness: 5/16"
Headroom in wheelhouse, cabin and engine room: 7'
Engine: CAT D398 - S/N 35Z1141, Arr # 5N72, 850 hp, year 1982, low hours
Engine was totally rebuilt in 2004 and purchased by owner in 2008.
Transmission: Twin Disc MG540 4.10:1 ratio - 100 hrs since rebuilt
Shaft size: 8"
Propeller: 6' x 5', 4 blade, RH, bronze
Coolers: Two Fe... read more
| Year: | 1954 |
| Length: | 70' 11" |
| Location: | Massachusetts USA |
| Price: | $675,000 |
View Details | |
64′ x 18′ 1100 hp Tug with Retractable Wheelhouse
New Price: $99,900 USD
With great lines and loads of power, she’s ready to go, go, go!
Modernized in the 1970’s with the addition of a retractable wheelhouse
Built in 1903 by Johnston Brothers of Ferrysburg, Michigan
Last survey 2012
6′ draft
Double steel hull
Powered by Detroit 16-V149, 1100 hp
Twin Disc MG 540
Generators: 2 – 1 Perkins, 1 Detroit
Fuel capacity: 2000 gal
Lube oil capacity: 200 gal
Cruising speed 10 knots
Prop: 4 blade 76″ x 54″ turning a 6″ shaft
Good over... read more
| Year: | 1903 |
| Length: | 64' |
| Location: | New York USA |
| Price: | $99,900 |
View Details | |
105ft Tug Boat $650,000
Bollard Pull: 50,000 Lbs. Builder: Jakobson Shipbuilding. Current ABS Loadline Certification. Main Engine: Fairbanks Morse 10 Cylinder Op. Horsepower: 2,000. Berthing For 8 Crew In 4 Staterooms.... read more
| Year: | 1961 |
| Length: | 32m |
| Location: | USA |
| Price: | $650,000 |
View Details | |
25′ x 14′ x 4′ Truckable Tug for Charter
•Charter Rate: $2,650/day + fuel
•Twin screw
•450 hp
•8kw generator
•Also available w/ 30′ x 50′ spud barge for $4,250/day + fuel
Location: Florida
File T2389... read more
| Year: | 2004 |
| Length: | 25' |
| Location: | Florida USA |
| Price: | $2,650 |
View Details | |
The DP-2 Anchor Handling Tug Supply Vessel, built in 2002 by INP Heavy Industries in Ulsan, South Korea, is a versatile maritime vessel designed for anchor handling and support operations. Measuring 64.3 meters in length, with a beam of 15.0 meters and a summer draft of 5.70 meters, it boasts a deadweight of 2117 tons and a gross registered tonnage (GRT) of 1864 tons. Powered by two Bergen diesel engines producing a total of 7200 brake horsepower (bHP), it can achieve a bollard pull of 76 tons at 100% Maximum Continuous Rating (MRC).
With DP-2 (Dynamic Positioning) capabilities, the vessel ... read more
| Year: | 2002 |
| Length: | 64.3m |
| Location: | USA |
| Price: | $3,300,000 |
View Details | |
76M/ 104.80MT BP/ DP2 AHTS FOR PRIVATE SALE $8,000,000
Built in 2012 by PT Loh & Loh Construction in Indonesia, this vessel is a powerful and versatile Offshore asset. With a LOA of 76 meters, a breadth of 18.5 meters, and a max draft of 6.4 meters, it has a Deadweight Tonnage (DWT) of 3060 tons and a Gross Registered Tonnage (GRT) of 3473 tons.
Powered by two General Electric 16V228 engines generating a total of 8200 BHP, the vessel is equipped with a DP2 system for dynamic positioning, allowing for precise maneuvering during complex offshore operations. It boasts a Bollard Pull (BP) of 104.8 tons, making it well-suited for anchor handlin... read more
| Year: | 2012 |
| Length: | 76m |
| Location: | USA |
| Price: | $8,000,000 |
View Details | |
This Anchor Handling Tug Supply Vessel (OSV) stands as a stalwart in maritime operations, currently classified as DP1. However, its exceptional built design allows for seamless low-cost recertification upgrade to DP2 class with the installation of two additional reference systems, utilizing its dynamic positioning capabilities in full.
With an overall length of 63.00 meters (206.6 ft.), a breadth of 15.00 meters (49.20 ft.), and a depth of 6.10 meters (20.00 ft.), this vessel exudes strength and versatility. The draft varies from 3.5 meters (11.48 ft.) in light conditions to 5.17 meters (16... read more
| Year: | 2006 |
| Length: | 63m |
| Location: | USA |
| Price: | $8,500,000 |
View Details | |
This is a 2002-built Ulstein A101 Norwegian Design DP2 Multi-functional Offshore Service Vessel (MOSV). It features a 640m2 deck space area and a total propulsion of 23500 HP at 750 rpm. Suitable for ROV or Air/Sat diving offshore operations. The vessel is of Norwegian quality built/design and has been well-maintained with a reasonable price tag below the current offshore market value. The keen and respectful Owners welcome LOI’s .
Vessel is equipped with Deck crane aft: 1 x 1.1 t SWL at 12.3m ;
– One knuckle jib sub-sea crane port (ROV crane) 1 x 10 t SWL at 15m, and
– One ... read more
| Year: | 2002 |
| Length: | 82' 1" |
| Location: | USA |
View Details | |
Capacities
Deck area: (5mt/m2) ; Total 331 m2
Deck cargo: 540 mt
Fuel oil: 606 m3
Drill/ water/ ballast: 458 m3
Fresh water: 354 m3
Liquid mud (8 tanks) : 651 m3 total
Dry bulk/ cement: 156 m3
Foam: 14.5 m3
Enclosed Vessel Specs Below
Note: With respect, reputable Owners require NCNDA to be completed from interested direct Buyers and its appointed representatives in order to disclose all commercial or technical information/ documentation.... read more
| Year: | 2009 |
| Length: | 59.78m |
| Location: | Texas USA |
| Price: | $5,500,000 |
View Details | |
/irs/image_bin/x/8341207.jpg)