Passenger vessel in very good condition, built in aluminum at Djupvik's shipyard. Keel stretched in 1970, extended at the construction yard and launched in 1973. Length 23.69m and width 5.07m. Equipped with Volvo D8A5 main engines installed, 2020. Navigation equipment from Garmin, including sidescan sonar. Passenger certificate for 59 pax in Swedish D area. Linda can be inspected in Landskrona. See: bit.ly/3DCaQpD... read more

Crew Transfer Vessel built in Denmark in 2006, since 2018 tour fishing boat in Öresund. Passenger certificate for 90 pax in Swedish D area, 40/B and 12/A50. Main engine: Caterpillar C32 with approx. 8800 operating hours, maximum speed approx. 21 kn. Navigation system from Garmin incl. sidescan sonar. Salon of approx. 20 m2, kiosk, sun deck in the stern and smaller cabin in the bow. Also equipped with fore- and aft thrusters (250/120 hp). See: bit.ly/3DAl6yq... read more

Rupert-RIB built in 2000 with certificate for 36 passengers. Smaller cabin for two persons, under the helm. 17 fixed jockey seats. Scania DI 14 (800 hkr) with less than 3000 running hours. Water jet and bow thruster. Maximum speed approx. 35 knots. RIB-6 can be inspected in Stockholm.... read more

Vintage icebreaking tug in good working condition, built in 1964 at Oskarshamn shipyard. Main engine MAK 6Z451AK of 750 kW, when built 1500 hp. The main engine was reportedly lowered in power in the 1970s. Auxiliary engines Lister Dursley (24 & 48 hp) with DAE generators. Berg pitch propeller. Hydraulic crane and towing hook on aft deck. Bollard pull 16 tons. On the main deck there is a small mess and galley, as well as a toilet with shower. Below deck there are four cabins, of which two has bunk beds. Isbjörn can be inspected in Tallinn by arrangement with Shipsforsale.... read more

The two masted schooner Libelle Stockholm was built in 1930 at Sietas Shipyard. 1985/86 she was rebuilt from cargo ship to passenger ship. Today, Libelle functions as a hotel ship with all permits and a berth in Borgholm, Öland. 12 cabins for between 1-2 persons. Large saloon with bar, galley and captain's cabin on main deck. Functioning older MAK main machine. Libelle can be inspected in Borgholm. See also our website: https://bit.ly/3Qdd9pR... read more

Well-maintained former Swedish Sea Rescue Society (SSRS) rescue cruiser with exceptional seaworthiness. Built by Swed Ship Composite in 1995, composite construction. Length 16.17 m, beam 5.16 m, GT 40. Powered by 2 × Scania DSI14, each 497 kW, currently lowered to approximately 85%. Cruising speed about 20 knots. In 2024/25, new Sleipner bow and stern thrusters were installed, including remote control and position-hold function. 1 cabin with 4 berths and a large saloon with galley, shower, and toilet. Small cargo deck aft with Palfinger crane, diving platform with ladder. Odd... read more

Fiberglass catamaran, Dynalift C43. Keel stretched in 2014 and taken into service 2017. Passenger certificate for 30 people for sea area B (Sweden). Approx. 15 seats under roof and large aft deck with opening on both sides. Two Cummins QSB 6.7 l, roughly 900 hours running time. Maximum speed of about 27 knots. Perfect for rod fishing or scuba diving. HavsCatten does also function as a crew trasfer vessel och survey-/workboat. See https://shipsforsale.com/en/ships-en/shipid/1206/passenger-ships_7_havscatten for full documentation and pictures.... read more

Reduced price for 2024! Newly renovated Benetti yacht built in 1964. 18.86 m x 5.04 m. Pleasantly laid out with many social areas. Large aft deck and large area on the flybridge. Two larger cabins with toilet and shower and a smaller cabin with two beds below deck. Spacious wheelhouse with galley. In 2021, an extensive renovation of Circe was carried out. The hull was blasted and painted inside, 25 m2 of sheet was replaced in the hull, all cabins were renovated and the axles were pulled. All information about Circe can be found here: bit.ly/3NilTIz Circe can be inspected in Steg... read more

Alfred Krank is a former Finnish oil spill response vessel, built in 1990. The vessel features a catamaran hull and is equipped with a spacious, elevated wheelhouse containing older Raymarine navigation equipment. The main propulsion consists of two Deutz engines of 525 hp each, with Hamilton water jets. Equipment also includes a hydraulic ramp, a Palfinger crane, and a rescue boat (Faster 440). A large working deck runs the full length of the vessel. Beneath the elevated pilothouse, there is a toilet/sauna on one side and a workshop/storage area on the other. Additionally, there is carg... read more

Tugboat built in Holland in 1953, rebuilt in 1977 including new wheelhouse. A total of 4 cabins with 7 beds, master cabin on main deck, others are below deck. Galley and mess. Main machinery MaK installed in 1967 at 622 kW. Bollard pull of 13 tons, certified in 2018. Tinto will be delivered with new Finnish certificates. Tinto can be inspected in Rauma, Finland.... read more