All Fishing Boat Commercial Vessels for sale in the US
65' DMR Offshore Lobster Boat For Sale
1981 65'x18' DMR Offshore Lobsterboat
3408 CAT 385hp
Twin Disc Reverse Gear
30KW John Deere Genset
New Koden Radar
Laptop w/ Max Sea Chartplotter
New PC w/ Windplot
RSW-5 Ton Chiller w/ Aeration
2-Floodable Below Deck Tanks-11,500 Pound Capacity Each
Fuel capacity 3000 gals
Rebuilt PTO (Off Reverse Gear)
Cruise Speed is 8-9 Knots
Boat is well maintained by owner
$180,000 OFFERS ENCOURAGED... read more
- Stock #064976 -
Lobster boat and barges if you want them ...ready to go to work
This is a very nice lobster boat built by the venerable Robert Rich.
She is constructed of West System Epoxy over 1.5" cedar planking on white oak frames. She has bronze fasteners.
Her Detroit 8v71 Engine has been recently rebuilt and has 0 hours on it.
-Full enclosed cabin with 4 bunks
-Jib crane and boom.
-Hydraulic Pot hauler
Top speed is 14 Knots.
The seller will entertain any reasonable offer.
This seller also has two lobster push barges for sale that can be... read more
|Price:|| $44,900 Tax Not Paid|
- Stock #238062 -
refurbished and repowerd in 2018 - new Cummins diesels!
The boat was repowered and refurbished in 2018.
Remanufactured Cummins engines were installed and are still under warranty.
Winches, nets, and rigging are in very good condition and the boat is ready to work.
Originally built as a 29 footer, the hull has been extended to thirty-eight feet. Thick, solid, fiberglass hull with a large working area. High sides and gunwales.
The cabin had carpentry work ongoing when photographed, but has a nice layout with a full head, large helm area with cabinets and seats.
Engine... read more
|Location:||South Carolina USA|
|Price:|| $99,500 Tax Not Paid|
- Stock #237665 -
32' Lafitte Skiff Shrimp Boat, Fully Rigged with Skimmer Nets, Caterpillar 3126 Engine, Ready to go!!!
This 1987 Custom Built Lafitte Skiff Shrimp boat is ready to go. It includes the frames, nets, ice boxes, and runs like a champ.
The seller states it was constructed at the time when the South Louisiana boat builders were transitioning from wooden to fiberglass hulls for Lafitte Skiffs. At that time they did not know how thick to make the hull so they were made thicker than later constructed boats.
It has a well-maintained Caterpillar 3126 diesel engine and has a 28x28... read more
|Price:|| $38,900 Tax Not Paid|
- Stock #202098 -
Awesome boat in excellent condition for diving , exploring, well maintained by owner!
This 1990 Radon Pilothouse is ready for you to enjoy for personal fishing enjoyment or commercial fishing. She is currently being used as a sea urchin & cucumber dive boat.
Radon was designed by surfers for the Channel Islands channel. It's a 33-foot surfboard with a 10-foot beam so it's good in the water. It surfs very well in a following sea. It's a very stable deck with a low center of gravity.
This 33 foot Radon is being powered by a Cummins engine coupled to a Konrad 680A outdrive ... read more
|Price:|| $123,000 Tax Not Paid|
- Stock #174641 -
** ALUMINUM HULL ** READY TO CRAB ** DIESEL POWER WITH LOW HOURS ** Set up for crab and salmon fishing.
Available for sale is this 1980 Hydraulic Fishing commercial fishing boat, All aluminum hull, powered by a Volvo Penta diesel motor. Top speed of approximately 22 mph, with a 300 gallon fuel capacity.
She is currently set-up for crab and salmon fishing. Overall length is 38 feet. The enclosed stern pilothouse has heat and room for up to 4 passengers to sleep. Included is a GPS, radar & VHF radio.
Per seller, the boat is nice with large fish boxes to store your catch. ... read more
|Price:|| $83,400 Tax Not Paid|
- Stock #233014 -
Royal Lowell design with under 1900 hours on a Cat 3406 main!
This 1980 Bruno & Stillman 55 Gillnetter is a design by the legendary Royal Lowell that is built to handle whatever you can throw at her. She features a cored fiberglass hull and a 275HP Caterpillar 3406 main Coupled with a Twin Disc 514, and a 2.5" stainless steel shaft, this Bruno steams along at 9 knots while burning about 4 gallons per hour at 1400RPM. There is also a generous amount of space in the engine room to conduct any necessary maintenance.
In the wheelhouse, she contains a Robertson AP300X autopil... read more
|Price:|| $94,500 Tax Not Paid|
Steel Freezer Trawler 3412 Caterpillar 600hp Twin 65kw Generator... read more
1990 36′ x 9.3′ x 4.2’Steel Trapnetter/Minnow Boat
Price: $17,500 USD
•Powered by Chrysler 318, est 50 hours since rebuild
•Velvet drive transmission
•Cruising speed: 10 mph
•Fuel capacity: 50 gal
•GRT:9, NRT: 7
• Location: Ohio
Details are deemed to be correct but are not guaranteed and should be individually verified
Please contact us for further information email@example.com
Scruton Marine Inc. Phone 519-583-1636... read more
1948 39′ x 12.7′ Steel Paasch Trapnetter
Price: $30,000 USD
Of all the trapnetter hull designs, the Paasch can’t be beat for rough water!
Powered by Lehman Ford Diesel, 120hp (hours unknown)
Cruising speed: 9 -10 mph
Fuel capacity: 100 gal
Electronics: radio, depth sounder, compass
GRT:14, NRT: 10
Deck space: 10′ x 26′ (11’6 at widest breadth)
Hull thickness: 1/4″
Shaft: 2″ Prop: Bronze 3 blade
Headroom: at least 5’11
Bilge pumps: 1
Weight: 18,000 lbs (estimated)
Height for trucking:... read more