/irs/image_bin/521792_1.jpg)
/irs/image_bin/x/7205425.jpg)
| Scruton Marine Services | |
| 49 John Street, Port Dover, Ontario, N0A 1N7, Canada | |
| Contact: | MJ |
| Telephone: | Reveal Telephone Number |
| All Scruton Marine Services Listings | |
Scruton Marine is an international marine brokerage company located in Ontario, Canada. We have over 25 years experience sourcing and selling vessels, engines and equipment. Unlike some brokerages we are also experienced in operating commercial boats, barges, engines, etc. We have an extensive list of sources for all things marine including service providers for surveys, towing, salvage, marine construction, etc.
Current View: All Scruton Marine Services Listings (235) | US Ships Listings Only (27)
Used Boats: 27 Adverts Displaying: 1-27
1979 41′ x 14’1 Twin Screw Aluminum UTB/ Workboat/Pilot Boat
Price: $220,000 USD
With fresh coatings and loads of updates, she’s ready to get to work!
Former US Coast Guard vessel
4′ draft
Powered by 2 Cummins 6 cta, 480 hp engines, 500 hours
ZF gears
Electronics: 2 – 12″ Garmins, 2 VHF, radar
New shafts, cutless bearings, couplings, props just reworked
New bottom and hull paint
Comes with lots of spare parts
Location: Mississippi... read more 
Flexifloat Barges
Price: 40′ x 10′ x 5′ (2 available)
Price: 20′ x 10′ x 5′ (5 available)
For lease only at this time
Last survey 2021
10-15 years old
Location: New York State... read more 
1935 42′ x 14′ Single Screw Steel Tug / Workboat
New Price: $12,000 USD
Built for ice-breaking, this rugged little tug runs strong and she’ll get the job done!
US flagged and documented as an industrial vessel
Shell plate thickness 1/2″ – 3/4″ at ice belt sheathing
Last survey 2020
Draft: 6’6″
Engine: Detroit 8-V71, 300 hp
Gear: Allison 4.5:1
Prop approx 56″
Fuel capacity: 2 x 250 gallon
Generator: Lister 3 kw, air cooled
Elect... read more
70' Ex US Army ST Harbor Tug $675,000
1954/2010 70' x 19.5' x 9' Ex US Army ST Class Harbor Tug
Overall length: 70'11"
Gross tonnage: 72 tons
Net tonnage: 57
Last survey: October 2010
Shell plate thickness: 5/16"
Headroom in wheelhouse, cabin and engine room: 7'
Engine: CAT D398 - S/N 35Z1141, Arr # 5N72, 850 hp, year 1982, low hours
Engine was totally rebuilt in 2004 and purchased by owner in 2008.
Transmission: Twin Disc MG540 4.10:1 ratio - 100 hrs since re... read more 
8" Electric Powered Booster Pump with Direct Feed Tank
200 hp electric motor with 15hp service water pump
Dredge pump is belt driven
Service water with soft start panel
Skid mounted
Just serviced and ready to go
Located in Florida
New price: $36,000 USD
Reference No. D2110... read more 
2013 40′ x 14′ Steel Spud Barge w/Crane (Sides Fold for Trucking!)
Price: $65,000 USD
The fold-up sides on this handy crane barge make it truckable
Shell plate thickness 1/4″
Powered by 2 Mercury 150hp outboards (2013)
1 hatch, 3 bulkheads
Spuds are 6" x 6", 20' long
Gas powered hydraulic power pack powers knuckle boom crane, spuds and raise and lower the outboards
Crane has 3/8″ cable and at 37′ will pick 4,000 lb
Hydraulic steering
Locat... read more 
64′ x 18′ 1100 hp Tug with Retractable Wheelhouse
New Price: $99,900 USD
With great lines and loads of power, she’s ready to go, go, go!
Modernized in the 1970’s with the addition of a retractable wheelhouse
Built in 1903 by Johnston Brothers of Ferrysburg, Michigan
Last survey 2012
6′ draft
Double steel hull
Powered by Detroit 16-V149, 1100 hp
Twin Disc MG 540
Generators: 2 – 1 Perkins, 1 Detroit
Fuel capacity: 2000 gal
Lube oil capacity: 200 g... read more 
1965 34.8′ x 13.3′ Steel Push Tug Powered by Caterpillar
Price: $25,000 USD
GRT: 19, NRT:13
Molded depth: 5.1′
Powered by Caterpillar D333 (1963)
Gear is CAT 3.39:1
Cable steering
Fuel Capacity: 400 gal
Located in New York State on Lake Erie... read more 
1985 35′ x 10’3 Steel Push Tug Powered by Detroit Diesel
Price: $75,000 USD
GRT: 16, NRT:13
Molded depth: 5’5
Powered by Detroit Diesel 8v71
Gear is Twin Disc 2.5:1
Fuel Capacity: 400 gal
Hydraulic steering
2 marine radios
Electric bilge pump
Engine driven air compressor
Located in New York State on Lake Erie... read more 
25′ x 14′ x 4′ Truckable Tug for Charter
•Charter Rate: $2,650/day + fuel
•Twin screw
•450 hp
•8kw generator
•Also available w/ 30′ x 50′ spud barge for $4,250/day + fuel
Location: Florida
File T2389... read more
SECTIONAL BARGES FOR LEASE
Price: $Depends on Use and Duration, call for pricing
2009 – 2017
Poseidon and Flexi Float
10′ x 40′ x 5′ and 10′ x 20′ x 5′
Several available in both sizes
Location: New York State
File Ref B2361... read more
1971 50′ x 14′ x 2′ Ex Navy Twin Screw Cargo Tug
Price: $35,000 USD
Upgraded hull inside and out, freshly painted 2021
Bought in year 2000
Transmissions: Twin Disc hydraulic
Engines:(2) 6-71 engines - both water damaged***
Shafts: (2)2″ shafts
Propellers: (2)brass 18″ props
Speed 12 knots
Fuel capacity:500 gal
Bilge pumps: 2
Cargo hold: 12’x 24′
Location: Texas... read more 
Fairbanks Morse 12 Cyl 38D 1/8 OP Dual Fuel Engine
12 cylinder
Condition: Surplus takeout
History: Removed from backup municipal
Generator plant
Located in Midland, Texas
Price: On request
Reference No. E2675... read more 
1979 80′ x 18′ x 6′ Documented Research Vessel / ex-US Navy Yard Patrol Craft
New Price: $119,000 USD
This well appointed documented research vessel is ready to go, fueled up and awaiting her next adventure!
GRT: 66 tons
Recently inspected and Documented vessel with Oceanographic Research Vessel Letter from USCG (good until 2025)
Wooden hull, aluminum superstructure
Hull has copper sheeting and a steel worm shoe the whole length of the keel
Cruising speed: 14 knots
... read more 
1990 36′ x 9.3′ x 4.2’Steel Trapnetter/Minnow Boat
Price: $17,500 USD
•Powered by Chrysler 318, est 50 hours since rebuild
•Velvet drive transmission
•Cruising speed: 10 mph
•Fuel capacity: 50 gal
•GRT:9, NRT: 7
• Location: Ohio
File FV2154
Details are deemed to be correct but are not guaranteed and should be individually verified
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-... read more
American 90B Winch Triple Drum $45,000
American 90B Winch Triple Drum
Price: $45,000 USD
American 90B Winch Triple Drum
Perkins diesel # 1104
726 hours
Engine Enclosure
(Less 1 drum)
Located in Ohio... read more 
1948 39′ x 12.7′ Steel Paasch Trapnetter
Price: $30,000 USD
Of all the trapnetter hull designs, the Paasch can’t be beat for rough water!
Powered by Lehman Ford Diesel, 120hp (hours unknown)
Cruising speed: 9 -10 mph
Fuel capacity: 100 gal
Electronics: radio, depth sounder, compass
GRT:14, NRT: 10
Deck space: 10′ x 26′ (11’6 at widest breadth)
Hull thickness: 1/4″
Shaft: 2″ Prop: Bronze 3 blade
Steering: mechanical
Headroom: at leas... read more 
25′ x 14′ x 4′ Truckable Tug for Charter
•Charter Rate: $2,650/day + fuel
•2018 Marine Inland
•Twin 200 hp John Deere engines
•Lower and upper helm stations, winches fendering, ready to go
•Also available w/ 30′ x 50′ spud barge for $4,250/day + fuel
Location: NY state – can ship it anywhere!
File T2400... read more 
1988 28′ x 8’6 Aluminum Work/Crew Boat
Price: $35,000 USD
3′ draft
Twin Mercruiser 5.7 MPI
Bravo 2 outdrives
Dual steering stations
Runs and drives
Push knee
Needs bottom paint and a little TLC
Location: New York State... read more 
2001 19′ x 8’6 SeaArk Aluminum Work Boat w/trailer
Price: $20,000 USD
18″ draft
No motor (had a 225 hp Mercury Optimax 2006)
4 picking eyes
Comes with trailer
Location: New York State... read more 
1995 19′ x 8’6 SeaArk Aluminum Work Boat
Price: $30,000 USD
18″ draft
Mercruiser 5.0 MPI, 260 hp
VHF radio
Location: New York State... read more
Cutter Basket for 14" Dredge $1,300
Cutter basket for 14” Dredge
 For sand
 Keyway 1"x 1/2'
 Shaft 4 1/4"
 Inside ring is 45 1/4"
 Inside of inside ring 38 1/2"
 Hub 12" deep x 8" ( 8"? is as best owner can tell/
It has to be turned over to measure)
 Like new
 Located in Michigan
 Price reduced from $1,700 USD to $1,300 USD... read more 
2018 180′ x 12′ Floating Bridge or 2 Barges with Ramps
•These custom units were designed as a bridge but could be used as 2 separate barges
•2 Barges – 60′ x 10′ x 3.5′
•3 Ramps – 20′ x 11.6′
•Top deck has 1′ over hang support with gussets
•Ramps: 1 barge has double ramps, 1 barge has a single ramp
•Designed to draw in the middle and lock together for one continuous length
•Materials – deck is 1... read more 
1948 (4) 10′ x 7′ x 50′ Sectional Barges
Price: $30,000 USD
Shell plate thickness 3/8″
GRT: 26
Good condition
Winch is American 50 B, powered by a Wisconsin V4 gas engine
Location: Michigan... read more 
1990 36' x 9.3' x 4.2' Steel Trapnetter/Minnow Boat
Price: $17,500 USD- NEW PRICE!
•Powered by Chrysler 318, est 50 hours since rebuild
•Velvet drive transmission
•Cruising speed: 10 mph
•Fuel capacity: 50 gal
•GRT:9, NRT: 7
• Location: Ohio... read more
1928 26.5' Steel Replica Tugboat $19,950
1928 26'6" x 8' x 3.6' Steel Replica Tugboat
27' tugboat replica
Boat was originally a lifeboat on a Great Lakes ferry, so has hardly ever been in the water.
All supporting and historical documents will be supplied to buyer at time of sale.
Original boat is constructed of 1/4" steel
Original hull is galvanized at waterline
Stern section and wheelhouse were professionally added and are constructed of 1/8" steel plate
Original hull is riveted and was built... read more 
1952 45′ x 13′ Roamer Subchapter M Compliant Model Bow Tug
Price: $225,000 USD
Meet the new workhorse for your fleet! She’s ready to get to work and she’ll get the job done!!
Draft: 5′
Ex USN Portsmouth Lady Submarine Tender
Fresh USCG Subchapter M COI with Great Lakes Route
Powered by 6-71 Detroit, cleanest Detroit around!
Gear is Twin Disc 4.5:1
Topside painted in 2022
Bottom painted in 2021
4 new batteries in 2023
New winches
Safety: all safety gear ... read more 1 Pages: 1