Brokerage Commercial Vessels for sale in the US
1954/2010 70' x 19.5' x 9' Ex US Army ST Class Harbor Tug
Overall length: 70'11"
Gross tonnage: 72 tons
Net tonnage: 57
Last survey: October 2010
Shell plate thickness: 5/16"
Headroom in wheelhouse, cabin and engine room: 7'
Engine: CAT D398 - S/N 35Z1141, Arr # 5N72, 850 hp, year 1982, low hours
Engine was totally rebuilt in 2004 and purchased by owner in 2008.
Transmission: Twin Disc MG540 4.10:1 ratio - 100 hrs since rebuilt
Shaft size: 8"
Propeller: 6' x 5', 4 blade, RH, bronze
Coolers: Two Fe...
read more
Year: | 1954 |
Length: |
70' 11" |
Location: |
Massachusetts USA |
Price: | $675,000 |
View Details |
8" Electric Powered Booster Pump with Direct Feed Tank
200 hp electric motor with 15hp service water pump
Dredge pump is belt driven
Service water with soft start panel
Skid mounted
Just serviced and ready to go
Located in Florida
New price: $36,000 USD
Reference No. D2110...
read more
Builder: C& G Boat Works, Inc.. Main Engines: (4) CAT 3512B @ 1575 HP. Passengers: 90. Clear Deck: 100ft x 25ft. Tonnage: 230 Lt (as per stability letter). Speed Light Boat: 25 KTS. @ 190 GPH. Speed Loaded: 21 KTS. @ 265 GPH. Flag: USA. ABS Certs: Int Loadline. USCG Certs: Subchapter T Oceans 200 NM...
read more
Year: | 2002 |
Length: |
47.85m |
Location: |
USA |
Price: | $2,950,000 |
View Details |
2013 40′ x 14′ Steel Spud Barge w/Crane (Sides Fold for Trucking!)
Price: $65,000 USD
The fold-up sides on this handy crane barge make it truckable
Shell plate thickness 1/4″
Powered by 2 Mercury 150hp outboards (2013)
1 hatch, 3 bulkheads
Spuds are 6" x 6", 20' long
Gas powered hydraulic power pack powers knuckle boom crane, spuds and raise and lower the outboards
Crane has 3/8″ cable and at 37′ will pick 4,000 lb
Hydraulic steering
Location: Western Michigan...
read more
Year: | 2013 |
Length: |
40' |
Location: |
Michigan USA |
Price: | $65,000 |
View Details |
- Stock #261875 -
40' 1962 Richardson Aluminum Push Boat! Twin 471 Detroit Diesel Engines! Perfect to Push, Pull, Fish, Shrimp, Crab, & More! Ready for the Water!
Fully operational 40' Richardson push boat for sale on the central coast of North Carolina. This work barge has twin 471 Detroit Diesel engines and is ready to go to work on your next project.
The Aluminum hull weighs around 6 tons and is perfect for break wall work or rock work or any job requiring water access with plenty of space for your equipment and gear.
The boat is equipped with three separate water tight compartments.
...
read more
Year: | 1962 |
Length: | 40' |
Location: | North Carolina USA |
Price: | $19,500 Tax Not Paid |
View Details |
6 VIRTUAL TOURS - 2 VIDEO - 155 PHOTOS - FULL SPECS & BROKER'S COMMENTS CAN BE VIEWED OF THIS COMMERCIAL 110' UTILITY VESSEL!
This Utility Vessel appears to be fully operational. The fire fighting system has not been tested following its recent launching after extensive detail in a local boat yard. The engines are very low hours and all of the vast array of machinery appears clean and serviceable. All of the surfaces are well painted and make a positive first impression. The owners' intended purpose has changed and they no longer have plans for their use of this boat. This after months o...
read more
Year: | 1989 |
Length: |
33.528m |
Location: |
Washington USA |
Price: | $235,000 |
View Details |
CHEAP SELL LCT BARGE FROM 500T TO 20000T. WHATSAPP + .86. 183.21063.149...
read more
The rig is laid-up status/ cold stacked by its reputable Owners. She features greater capacities in terms of space, weights and volumes for bulks, liquids and general cargo compared to previous jack-up generations. The rig was awarded rig of the Quarter across ExxonMobil’s international MODU fleet and was also presented with their prestigious Gold Award for working more than 200,000 man-hours without work time injury as a result of its exceptional operational and HSE performance.In addition, the rig was upgraded with high pressure, high temperature (HTHP) capabilities in 2010....
read more
Year: | 2007 |
Length: |
71m |
Location: |
Texas USA |
Price: | $55,000,000 |
View Details |
HIGH QUALITY, LOW MAINTENANCE, CUSTOMIZABLE, LIFETIME aluminum welded boats.
Depending on options you can expect new build to cost below HULL SUBTOTAL: $165,808.00 USD Complete turnkey.
We have just received this quote from the boatyard and client is not moving forward to it's being offered to qualified buyers: Quote date: 2-10-2023
This very versatile work-boat can handle serious loads for her size. Whether you need a Landing Craft, Dive Boat, Recovery Platform, Fish-Farm Tender, Portable Work Platform, Crew Boat, or ALL of the above, she can handle the job. This is a "Do ...
read more
2009 I 47m I 417PAX I HIGH SPEED CATAMARAN FERRY AVAILABLE FOR PRIVATE SALE
We are pleased to propose a 2009 built by “Austal” High-Speed Catamaran with 417 Pax capacity currently available for private sale.
She has LOA: 47m and is equipped with 4 x MTU 4000 M70 + “Kamewa” Waterjets that can deliver 43kn. Vessel is fully renovated and upgraded in 2022/ 2023.
– Class (special survey) was renewed in April 2023.
– She is HSC 1994 type, and all exemptions were removed since Owners bought the vessel.
– The only exemption is for open Liferafts (wh...
read more
Year: | 2009 |
Length: |
47.5m |
Location: |
USA |
Price: | $5,700,000 |
View Details |